ADs & Safety Bulletins
ADs & Safety Bulletins

FAA proposes AD adding stricter airworthiness limitations for the AW189

A proposed FAA AD would supersede AD 2024-05-07 for all Leonardo AW189 helicopters, requiring operators to update their airworthiness limitations to a newer Leonardo issue to address fatigue cracking and corrosion in key structure.

The FAA has proposed an airworthiness directive (Docket No. FAA-2026-13796; Project Identifier MCAI-2026-00015-R) that would supersede AD 2024-05-07 for all Leonardo S.p.a. Model AW189 helicopters. The notice was published in the Federal Register on November 10, 2026. Comments are due by December 28, 2026.

The problem

The existing AD requires operators to revise the airworthiness limitations section (ALS) of the maintenance manual or instructions for continued airworthiness, plus their approved maintenance or inspection program. Since then, Leonardo has developed new or more restrictive limitations, and EASA has issued EASA AD 2026-0004, dated January 13, 2026. The FAA says the aim is to address fatigue cracking, damage and corrosion in principal structural elements, which could lead to part failure and loss of control.

Proposed required action

Within 30 days after the AD takes effect, operators would revise the ALS and their maintenance or inspection program to include the tasks, thresholds and intervals, including life limits, in AW189 Air Vehicle Maintenance Planning Information 89-B-AMPI-00-P, Chapter 04, Airworthiness Limitations, Issue 009, dated November 26, 2025. After that, alternative actions, intervals or life limits would not be allowed unless approved by the FAA, EASA or Leonardo’s EASA Design Organization Approval.

Cost

The FAA estimates the AD would affect four U.S.-registered helicopters, at 1 work-hour ($85) per helicopter, or $340 for the U.S. fleet.

GO DEEPER

Go straight to the source.

Rotor Brief provides short original summaries. Read the original publication for full context.

Read the original article

News summaries are not maintenance instructions or an official airworthiness determination. Consult the applicable authority and current approved documents.